Analysis And Design Of (G+5) Residential Building Using Etabs

Abstract

The design process of structural planning and design requires not only imagination and conceptual thinking but also sound knowledge of science of structural engineering besides the knowledge of practical aspects, such as recent design codes, bye laws, backed up by ample experience, intuition and judgment. The purpose of standards is to ensure and enhance the safety, keeping careful balance between economy and safety. In the present study G+5 building at Ameerpet, Hyderabad, India is designed (Slabs, Beams, Columns and Footings) using Auto CAD software. In order to design them, it is important to first obtain the plan of the particular building that is, positioning of the particular rooms (Drawing room, bed room, kitchen toilet etc.) such that they serve their respective purpose and also suiting to the requirement and comfort of the inhabitants. Thereby depending on the suitability; plan layout of beams and the position of columns are fixed. Thereafter, the loads are calculated namely the dead loads, which depend on the unit weight of the materials and the live loads, which according to the code IS:456- 2000 and

HYSD BARS FE415 as per IS:1786-1985. Safe bearing capacity of soil is adopted as 350KN/M2 at a depth of 6ft and same soil should extent 1.5 times the width of footing below the base of footing. Footings are designed based on the safe bearing capacity of soil. The main motto of our project is to cultivate a thought of application of new techniques and idea of our modern residential building this project possess the shear effort for the analysis and design of a residential building by using ETABS with process of structural planning and designing requires not only imagination and conceptual thinking but of practical aspects, such as relevant design codes and bye-laws, backed up by sample experience, institutions.

DOI: https://doi-ds.org/doilink/07.2025-58927653